Archive for the ‘Tips’ Category

Tuning Mozilla Firefox

Posted: October 16, 2009 in Tips

Bagi para pengguna Mozilla Firefox tentu ingin meningkatkan performa browser kesayangannya ini. Berikut ada beberapa langkah untuk melakukan tune-up si Firefox:

Sebelum melakukan langkah berikut, silahkan ketik di address bar about:config

1. Pada Filter bar ketikkan/copykan network.http.pipelining lalu, double-click pada reference yang ada untuk merubah dari false ke true.

2. Pada Filter bar ketikkan/copykan network.http.pipelining.maxrequests lalu double-click pada reference yang ada untuk merubah angka dari 4 ke angka dari 10 sampai 30. Saya sendiri pilih 30.

3. Pada Filter bar ketikkan/copykan network.http.proxy.pipelining. lalu, double-click pada reference yang ada untuk merubah dari false ke true.

4. Pada Filter bar ketikkan/copykan network.dns.disableIPv6 lalu, double-click pada reference yang ada untuk merubah dari false ke true.

5. Pada Filter bar ketikkan/copykan plugin.expose_full_path lalu, double-click pada reference yang ada untuk merubah dari false ke true.

6. Pada Filter bar ketikkan/copykan network.protocol-handler.external.ms-help sekarang anda akan membuat refernce baru dengan nilai Integer. Caranya, Click-kanan mouse pada Reference dan plih “New”, lalu “Integer”. Pada Integer bar ketikkan/copykan nglayout.initialpaint.delay lalu click OK. dan masukkan nilai 0 (Nol) dan click OK.

7. Pada Filter bar ketikkan/copykan network.protocol-handler.external.ms-help sekarang anda akan membuat refernce baru dengan nilai Integer. Caranya, Click-kanan mouse pada Reference dan plih “New”, lalu “Integer”. Pada Integer bar ketikkan/copykan content.notify.backoffcount lalu click OK. dan masukkan nilai 5 (Lima) dan click OK.

8. Pada Filter bar ketikkan/copykan network.protocol-handler.external.ms-help sekarang anda akan membuat refernce baru dengan nilai Integer. Caranya, Click-kanan mouse pada Reference dan plih “New”, lalu “Integer”. Pada Integer bar ketikkan/copykan ui.submenuDelay and click OK. lalu click OK. dan masukkan nilai 0 (Nol) dan click OK.

Kemudian restart Firefox-mu, dan rasakan perbedaannya.
Selamat mencoba.

Sumber : http://www.rachmansyah.web.id/blog1.php/2009/05/04/tuning-mozilla-firefox-mu

Advertisements

Resetting Printer Canon

Posted: January 8, 2009 in Tips

Canon BJC-2000 BJC-2100 Series
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel, Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.
++++++++

Canon GENERIC “S” SERIES RESET CODE
Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in succession. Note: you are still holding the POWER button). The printer’s carriage will “reset” or move momentarily. If the above was properly performed the printer will enter the “Service Mode”.
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM – Info printout.
3. EEPROM – Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point – However it is best leave them unaltered – You have been warned!) After selecting the desired mode (eg 4), press the POWER button to “set” the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.
+++++++++++

Canon PIXMA iP1000
Waste Ink Counter Reset Manual for Service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
+++++++++++++

Canon PIXMA iP1500
Waste Ink Counter Reset. Manual for Service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green
6. Release both buttons
++++++++++

Canon i320, i255
Waste Ink Counter Reset.
Step 1 : Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
or Step 1: Manual Temporary
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
step 2 : Software for Permanant
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark “After service mode Pls use software for permanent reset”
++++++++++
Canon i850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses – light color – function
Number of presses – light color – function
0 presses – green – Test print (or exit service mode on i960)
1 press – orange – EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses – green – EEPROM initialize
3 presses – orange – Reset waste ink counter
++++++++++
Canon S450 Printer
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three times. The indicator should be orange.
7: Press Power to set data
++++++++++
Canon BJC 1000 Series
1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.
++++++++++
Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650
Unplug Power Cord
Hold POWER and RESUME buttons
Plug in Power Cord
Release buttons
Open front door of printer
Hold the CARTRIDGE and RESUME buttons
Press POWER
Release all buttons after the beeps
Press CARTRIDGE once
Press RESUME
++++++++++
Canon BJC-5000
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
++++++++++
Canon BJC-5100
Self Test
Switch Printer off. Hold Power for 1 beep.
Waste Counter Reset
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.
++++++++++
Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620
Canon BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three times. The indicator should be orange.
6: Press Power to set data
++++++++++
Canon BJC-600 BJC-600e BJC-610 BJC-620
1: Unplug Power Cord
2: Hold POWER and FF and Print Mode buttons
3: Plug in Power Cord
4: Release after the beeps
++++++++++
Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
1: Unplug Power Cord
2: Hold POWER and RESUME buttons
3: Plug in Power Cord
4: Release buttons after the printers starts up
5: Hold CARTRIDGE and RESUME
6: Press POWER
7: Release all buttons after the beep
8: Press CARTRIDGE 16 times
9: Press RESUME
10: Unplug the Power cord
++++++++++
Canon BJ-30 BJC-35v BJC-70
F14 Error Reset
1: Unplug adapter
2: Hold POWER
3: Plug in ADAPTER
4: Release POWER after printer starts
5: Hold FF and MENU and press POWER
6: Release after beeps
7: Press Cartridge until 1A is displayed
8: Press ONLINE
9: Press POWER to shutoff printer
10: Unplug printer then re-plug printer
++++++++++
Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button. Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
You are now in Service mode.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a resta
++++++++++
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950,
PIXMA IP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
+++++++++
Canon S900, S820, S750, S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button. While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button. Pressing the RESUME key will select a function; for example, pressing
RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.
++++++++++
Canon S9000
Turn off printer
Hold down Resume button and press Power button. Keep holding down Power button and let Resume button go. Press Resume button 2 times then let BOTH buttons go. Green lights will flash and then stop blinking. When green lights are solid, press the Resume button 4 times. Press the Power button and the printer should turn off, if not, press
the Power button once more. Your printer should respond as normal.
+++++++++
Canon MPC190
Reset Waste Ink
1) Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Sumber : http://m-kurniawan.web.id/resetting-printer-canon.htm?cp=17

Reset Senao EOC/NOC 3220 EXT 3220+

Posted: October 23, 2008 in Tips

Peralatan yg diperlukan adalah kabel serial RS232 Female-Female

Setelah kabel Null Modem siap, selanjutnya ikuti saja langkah-langkah berikut :

  1. Hubungkan kabel serial ke port com pada komputer/laptop.
  2. Jalankan aplikasi Hyperterminal. Klik Start kemudian pilih Programs -> Accessories -> Communications -> HyperTerminal.
  3. Berikan nama koneksi apa saja, misalnya Senao 3220. Kemudian pilih koneksi COM1 (atau COM2 tergantung port di komputer).
  4. Setting HyperTerminal baudrate “38400″, data bits “8″, parity “none”, stop bits “1″, flow control “None”. Kemudian tekan “OK”.
  5. Matikan power pada POE selama kurang lebih 5 detik kemudian On-kan kembali.
  6. Tunggu sampai prompt # muncul pada layar HyperTerminal.
  7. Ketik “flash reset”, Tekan enter.
  8. Ketik “reboot”, tekan enter. Perangkat Senao akan reboot dan semua setting akan dikembalikan seperti semula.
  9. Jika tidak terdapat kerusakan, Anda bisa mengakses kembali melalui WEB dengan alamat IP default : 192.168.1.1

Sumber : http://rakhmat.wordpress.com/2008/01/16/reset-senao-eocnoc-3220-ext-3220/

Memanfaatkan Flashdisk Yang Mati

Posted: September 17, 2008 in Tips

Awalnya seh gara-gara flashdisk mati, kayakya gara-gara virus or jarang nge-unplug or unmount tuh flashdisk, e..jd mati beneran…di windows nge-plug tp gak bisa diformat n gak bisa di pake..akhirnya..karena emg aku orang miskin yg ga bsa bli flashdisk aku cari akal gmana caranya supaya flashdisk kesayanganku itu hidup kembali…**bangkit lagi**
dengan penuh perjuangan akhirnya ku coba pake windows, ternya memang gak bisa diformat, tapi kecerahanku mulai tiba ketika kucuba pake LINUX SLAX-KILLBILL or slax yg lain, pake KNOPPIX jg bisa, or pke linux pa lah, yg penting bisa bootCD or LIVE_CD tp disarananin buat pemula pake SLAX KillBill aja..coz lebih mudah caranya, yg pasti skrg udh di OS LIVECD or LINUX so… Caranya :

1. Coba “colokin” flashdisk pada lubang or tempatnya, Port USB
2. Perhatikan, apakah flashdisk masih terbaca or minimal lampunya
nyala..
3. Buka Console lalu ketik $ CFDISK /dev/sda1 atau /sda__ sesuai
dengan flashdisk keberapa yg kita “colok” ke komputer, tp dr pada
flasdisk yg lain beresiko datanya hilang, maka disaranin agar copot
dulu flashdisk yg lain, so tinggalin flashdisk yg rusak td sendirian.
4. nah..klo dah dicolokin, trus dah diketik $ cfdisk /dev/sda1 terus
Delete or hapus tuh Partisi flashdisk
5. CREATE NEW or buat baru lagi partisi tuh flashdisk yg rusak, trus klo
udah, di WRITE==> trus yes
6. nah..klo udah skrg flashdisk kita dah py partisi baru… bisa diformati
di windows skrg, tp klo yg lbh baik untuk partition table yg lebih
baik, sebaiknya format di LINUX aja.
nah..wat yg mau cuba format di LINUX, untuk hasil yg lebih optimal coba restart dulu komputer tanpa mencopot usb Flashdisk, nah klo dah muncul linuxnya lagi, masuk ke konsol so ketik
$ mkfs.vfat-f32 /dev/sda__
n..wat yg pake SLAX KillBILL kita bisa jg format pake NTFS caranya..liat aja di direktori bin, tuh banyak extension wat format Flashdsik
$cd /bin
$ls
nah tinggal liat deh byak bgt kan..tp yg ada huruf depannya MKFS

sumber : http://linux.or.id/node/2835


Untuk membuat friendster lebih atraktif dan personal ada beberapa cara yang lazim digunakan, salah satunya adalah membuat FS kita ber-wallpaper foto kita. Bagaimana caranya? ikuti tips berikut :

· Pastikan anda punya foto hosting. Jika belum, daftar di http://photobucket.com/ ato di http://www.imageshack.us/, gratis kok.

· Kalo udah daftar, silahkan login ke foto hosting tersebut.

· Upload foto yang akan dijadikan background di FS.

· Kalo sudah, klik foto tersebut. Pilih ke resolusi yang diinginkan (klo bias pilih resolusi yg terbesar, misal 1280×1024).

· Jika foto sudah terupload/tersimpan, ambil kode URL nya. Caranya klik kanan di bagian foto tersebut dan pilih copy image location

· Buka notepad (start—program—Accessories—notepad atau dari start—run—ketik notepad)

· Paste kan url foto yg sudah kamu kopi tadi.

· Kemudian login ke FS kamu..

· Masuk ke edit profil, pilih tab costumize

· Pada kotak Costumize CSS (di bagian bawah) cari kode sbb, misalnya :

/* PAGE BACKGROUND */

body {

background-image: url(http://i532.photobucket.com/albums/ee322/pejewan_photos/tornadobig5.jpg);

background-color: #ffffff;

background-attachment: fixed;

background-position: bottom left; dst

· Ubah pada bagian url(http://i532.photobucket.com/albums/ee322/pejewan_photos/tornadobig5.jpg); dengan url foto kamu tadi, kemudian save dan liat kembali profile FS kamu. Sekarang background FS kamu sudah berubah sesuai dengan foto yang kamu inginkan.

USB Ubuntu 7.10 Gutsy Gibbon install

Posted: August 14, 2008 in Tips

USB Ubuntu 7.10 Essentials:

  • Ubuntu7.10 ISO
  • CD Burner
  • 1GB USB flash drive (2GB+ recommended)
  • U710fix.zip

Ubuntu 7.10 USB installation tutorial:

Hint: You can drastically speed up the install by Copying and Pasting most commands into the terminal instead of manually typing them out. With the exception of replacing X with your drive letter.

  1. Grab the Ubuntu 7.10 ISO and burn it to a CD
  2. Insert the CD and your USB flash drive
  3. Reboot your computer into Ubuntu from the Live CD
  4. Open a terminal window and type sudo su
  5. Type fdisk -l to list available drives/partitions. Note which device is your flash drive (example: /dev/sda) Throughout this tutorial, replace X with your flash drive letter. For example, if your flash drive is sdb, replace X with b.
  6. Type umount /dev/sdX1
  7. Type fdisk /dev/sdX
    • type p to show the existing partition and d to delete it
    • type p again to show any remaining partitions (if partitions exist, repeat the previous step)
    • type n to make a new partition
    • type p for primary partition
    • type 1 to make this the first partition
    • hit enter to use the default 1st cylinder
    • type +750M to set the partition size
    • type a to make this partition active
    • type 1 to select partition 1
    • type t to change the partition filesystem
    • type 6 to select the fat16 file system
    • type n to make another new partition
    • type p for primary partition
    • type 2 to make this the second partition
    • hit enter to use the default cylinder
    • hit enter again to use the default last cylinder
    • type w to write the new partition table
  8. Type umount /dev/sdX1 to ensure the 1st partition is unmounted
  9. Type mkfs.vfat -F 16 -n ubuntu710 /dev/sdX1 to format the first partition
  10. Type umount /dev/sdX2 just to ensure the 2nd partition is unmounted
  11. Type mkfs.ext2 -b 4096 -L casper-rw /dev/sdX2 to format the second partition
  12. Remove and Re-insert your flash drive
  13. Back at the terminal, type apt-get update
  14. Type apt-get install syslinux mtools
  15. Type syslinux -sf /dev/sdX1
  16. Type cd /cdrom
  17. Type cp -rf casper disctree dists install pics pool preseed .disk isolinux/* md5sum.txt README.diskdefines ubuntu.ico casper/vmlinuz casper/initrd.gz /media/ubuntu710/

Ignore any “cannot create symbolic link” errors

  1. Type cd /home/ubuntu
  2. Type wget pendrivelinux.com/downloads/U710fix.zip
  3. Type unzip -o -d /media/ubuntu710/ U710fix.zip
  4. Restart your computer, set your BIOS or Boot menu to boot from the USB device and reboot again.

You should now have a USB Ubuntu 7.10 Gutsy Gibbon flash drive that should automatically save your changes, restoring them on boot.

Notes: If your having trouble getting Ubuntu to boot, your memory stick may have a corrupted MBR. To repair the MBR of your USB device, at the terminal type sudo apt-get install lilo then type lilo -M /dev/sdX (replacing X with the letter of your flash device)

Sumber : http://www.pendrivelinux.com/2007/09/28/usb-ubuntu-710-gutsy-gibbon-install/


Yang Harus Disiapkan:

1. Sebuah komputer yang dilengkapi optical drive (CD atau DVD) dan port USB yang dapat bekerja dengan baik.
2. Sebuah USB flash disk berkapasitas 1 atau 2 GB.
3. CD instalasi Windows XP.
4. Aplikasi pembuat modul instalasi (USB_PREP8 dan PEtoUSB) yang dapat diunduh cuma-cuma melalui link http://www.sendspace.com/file/7n781n

Langkah-langkah Pembuatan:

1. Tancapkan USB flash disk ke salah satu port USB. Ingat-ingat posisi drive-nya. Apakah F:, G:, H:, dan sebagainya.

2. Saat Anda berada di posisi normal (desktop), masukkan CD instalasi Windows XP ke optical drive. Jika komputer menjalankan proses instalasi secara otomatis, batalkan saja dan tutup semua aplikasi yang tengah berjalan.

3. Download dan ekstrak aplikasi yang penulis berikan. Saran penulis, ekstrak seluruh isinya ke sebuah folder, semisal C:\USB.

4. Selanjutnya, buka folder di mana Anda mengekstrak aplikasi modul pembuat instalasi, kali ini kita ambil contoh C:\USB.

5. Jalankan file bernama “usb_prep8.bat” maka di layar monitor akan tampak jendela Command Prompt berisi macam-macam perintah. Jika sudah muncul tulisan “Press any key to continue,” tekan sembarang tombol untuk konfirmasi.

6. Di layar akan muncul jendela PEtoUSB yang meminta Anda memformat USB flash disk Anda. Tak perlu mengubah setting apa pun, langsung klik Start untuk mulai proses format. Jawab konfirmasi sesuai kebutuhan Anda.

7. Jika sudah selesai, tutup jendela PEtoUSB (jangan menutup jendela Command Prompt yang tadi terbuka ketika Anda menjalankan usb_prep8.bat), maka di layar akan muncul opsi-opsi dari 0 hingga 5.

8. Gunakan opsi 1 untuk memilih sumber file instalasi yang nantinya akan disalin ke flash disk. Disini, tentukan di drive mana Anda menyimpan instalasi Windows XP. Pilih saja optical drive di mana sudah ada CD Windows XP di dalamnya, atau pilih folder pilihan Anda jika Anda telah menyalin file instalasi Windows XP ke folder tertentu.

9. Pilih opsi 3 untuk menentukan di mana Anda mencolok flash disk. Kalau flash disk Anda berada di drive F:, maka ketik F dan tekan ENTER. Jika drive G: maka ketik G dan tekan ENTER, begitu seterusnya berlaku untuk drive lain.

10. Selanjutnya pilih opsi 4 untuk mulai proses pembuatan modul instalasi yang nantinya akan disalin ke flash disk secara otomatis. Jawab apa pun konfirmasi yang muncul dengan Y atau YES atau OK atau bentuk persetujuan lain.

Selesai! Kini flash disk Anda telah siap digunakan untuk instalasi Windows XP! Silahkan melakukan setting pada BIOS subnotebook Anda, dan pilih Removeable Disk (atau apa pun nama lainnya) sebagai media pertama yang dijalankan saat booting.

Sumber : Eko Ramaditya Adikara (Rama) www.ramaditya.com